K & S Sales, Inc. - evaporative cooler parts & accessories



MasterCool, UltraCool & AeroCool Cooler Pads
MAX-COOL® PADS

THE ULTIMATE COOLING MEDIA FOR SINGLE INLET COOLERS

Long Life - High Air Velocity - Energy Efficient

Consistent Performance

50% heavier paper holds more water and lasts longer
Independent lab and field tests verify highest efficiency
Fast wet-out

Engineered for optimal performance and longevity...Cellulose base impregnated with plastic resins and anti-rot agents...Durable and easy to install.

 

Celdek Pads
Celdek Style Pad
Pad is not one piece
12" Wide Sections
with one smaller section
to make correct width

8" & 12" Thick Celdek Pads
The Most Efficient
Cooler Pad Made

For MasterCool
UltraCool
& AeroCool Coolers

Click Here For:
Installation Instructions

Note:
New Celdek type pads will emit a slight odor when first installed

Click Here To See Why

 

Celdek Pads
Celdek Style Pad
Pad is not one piece.
12" Wide Sections
with one smaller section
to make correct width

8" & 12" Thick Celdek Pads
The Most Efficient
Cooler Pad Made





MasterCool
MW 5500 Window View


Pad is not one piece.
(4 PCS) 10" x 26 1/8" x 3" Sections

 

 

Celdek Pads
Celdek Style Pad
Pad is not one piece.
12" Wide Sections
with one smaller section
to make correct width

8" & 12" Thick Celdek Pads
The Most Efficient
Cooler Pad Made

 

Celdek Pads
Celdek Style Pad
Pad is not one piece.
12" Wide Sections
with one smaller section
to make correct width

8" & 12" Thick Celdek Pads
The Most Efficient
Cooler Pad Made

Click Here For:
Installation Instructions

Note:
New Celdek type pads will emit a slight odor when first installed
Click Here To See Why

 

MAX-COOL® PADS
Ridgid Cooling Pad Media


Free Shipping/Handling included in Price


UltraCool Pads
Click Here For:
Installation Instructions

8" Thick
Pad

P/N 3440
41 1/4 x 22 1/2 x 8
UltraCool
ADA 50 or ASA 50 or AUA 50

$156 Total Cost

Free Shipping
8" Thick
Pad
P/N 3441
41 1/4 x 29 x 8
UltraCool
ADA 70 or ASA 70 or AUA 70
$182 Total Cost

Free Shipping
12" Thick
Pad
P/N 310108
(Champion Mfg Part)

41 1/4 x 22 1/2 x 12
UltraCool
ADA 5012 or ASA 5012
$265 Total Cost

Free Shipping
12" Thick
Pad
P/N 310109
(Champion Mfg Part)
41 1/4 x 29 x 12
UltraCool
ADA 7012 or ASA 7012


$286 Total Cost

Free Shipping


MAX-COOL® PADS
Other Sizes Available
Including 12" Thickness


Free Shipping/Handling included in Price

AeroCool Pads
Click Here For:
Installation Instructions

8" Thick
Pad

P/N 3437
40 x 23 x 8
AeroCool 4800

$155 Total Cost

Free Shipping
8" Thick
Pad
P/N 3439
40 x 30 x 8
AeroCool 6800
$178 Total Cost

Free Shipping
AeroCool Window Cooler Model
BW 5500 Brisa

 


Glacier Cor ™

Pad Media

Free Shipping/Handling included in Price

MasterCool Window View Cooler Pads

3" Thick
Pad
P/N 3436
(4 pcs - 10 x 26 1/8 x 3)
MasterCool
Window View Pad
MW 5500
$149 Total Cost

Free Shipping

 

MAX-COOL® PADS
MasterCool Pads
For Down Draft & Side Draft
Residential Coolers

Free Shipping/Handling included in Price

Click Here For:
Installation Instructions

8" Thick
Pad
P/N 3437
40 x 23 x 8
MasterCool
Fits EC 430 - EC 440
MC 43 - MC 44
PM 100
$155 Total Cost

Free Shipping
8" Thick
Pad
P/N 3438
40 x 28 x 8
MasterCool
Fits EC 630 - EC 640
MC 63 - MC 64
PM 200
$176 Total Cost

Free Shipping

 

12" Thick
Pad
P/N 3452
40 x 23 x 12
MasterCool
Fits HPC 430 - HPC 440
HC 43 - HC 44
PM 120
$239 Total Cost

Free Shipping
12" Thick
Pad
P/N 3453
40 x 28 x 12
MasterCool
Fits HPC 630 - HPC 640
HC 63 - HC 64
PM 220
$265 Total Cost

Free Shipping

MAX-COOL® PADS
Industrial Model MasterCool Pads Below


Pads Below Are Too Large To Be Shipped via UPS
They Must Be Shipped via Common Frt Carrier

Freight Collect

Shipping Can Range From $70 to $200

Free Shipping For Quantities Show Below
To The Following States Only:
AZ, CA, CO, ID, KS, MT, NM, NV, OK, OR, TX, UT, WY

Email For Special Quote on Very Large Quantities

Note: Two Pads Required For Dual Inlet Coolers
(Models MD 628 - MS 628 - MU 628)


One Pad Required For Single Inlet Coolers
(Models MD 524 - MS 524 - MU 524)

8" Thick
Pad
P/N 3460
40 x 37 3/4 x 8
MasterCool
PM 300

One Pad Set
$210
Plus Shipping

Two Pad Sets
$400

Plus Shipping
Free Shipping
on Four or more

8" Thick
Pad
P/N 3461
48 x 44 5/8 x 8
MasterCool
PM 400

One Pad Set
$283
Plus Shipping

Two Pad Sets
$546

Plus Shipping
Free Shipping
on Three or more

12" Thick
Pad
P/N 3465
48 x 44 5/8 x 12
MasterCool
PM 500

One Pad Set
$400
Plus Shipping

Two Pad Sets
$780

Free Shipping

Note: Two Pads Required For Dual Inlet Coolers
(Models MD 628 - MS 628 - MU 628)


One Pad Required For Single Inlet Coolers
(Models MD 524 - MS 524 - MU 524)

Click Here For:
Installation Instructions

Evaporative Swamp Cooler Replacement Parts

For Nearly All Brands of Evaporative Swamp Coolers
Motors, Pumps, Aspen Pads, Floats, Pulleys, Bearings, Cooler Covers,
MasterCool Pads, UltraCool Pads, AeroCool Pads

Most Commonly Used Replacement Evaporative Swamp Cooler Parts
Are Available From Us

 


WHY IS THERE AN ODOR FROM MY NEWLY INSTALLED COOLER PAD?
When a new Celdek type pad is installed in evaporative coolers, there is usually a slight odor emitted.
This slight odor will dissipate and be gone after a short period of time.

When these pads are first wet out a slight odor may occur from the dust created when the pad is manufactured and cut to size.

THIS ODOR IS NOT TOXIC OR HARMFUL.

The operation of this type cooling pad requires a wet out period (typically several hours without airflow) followed by draining and refilling the sump water pan. This will remove the small amount of residue in the media that would be the source of the odor. This operation may have to be repeated on larger systems that do not drain completely.

All evaporative cooling systems have odor problems related to the system cleanliness. This is how 'swamp coolers' first got its name. When left UN-cleaned, they would start to smell like a swamp. All cooling media require cleaning, both initially, and ongoing. All cooling pads of this type are manufactured using the same base resin materials and have the same odor associated with them. All new cooler pads have a 'new pad' odor that dissipates with use. Once the pads are 'broken in', this odor will disappear. The once active ingredients in the paper of the cooling pad are rendered inert during the manufacturing processing, however the odor from these materials lingers until the pads are washed clean by the wetting process after installation.


We Accept Visa And MasterCard

We Accept Major Credit Cards

Contact Us
At the Address Below


Use e-mail address below for Inquiries, Questions & Quotes

Please Use Phone To Place Orders Only

We Reply To All E-mail Requests
Our Replies Include Our Phone Number And A Personal Contact


Privacy Statement:
We will never sell, rent, or otherwise provide your e-mail address to any other party


K & S Sales
5718 County Road 6150
Lubbock , TX 79415


Phone (806) 747-4514

Order Entry Only

For Information or Quote
Click Here to E-mail us


sales@kennspenns.com


Or
Click Info Below


Click For Information

Copyright © 1999 KennsPenns All Rights Reserved

Home
Cooling
Heating
Site Map